System Configuration - Furuno FSS-3BB Installation Manual

SYSTEM CONFIGURATION

Navigation equipment,
Radio communication,
Net sonde, etc.
USB Device *1, *3
(USB Mouse,
USB Flash Memory,
USB3.0: 2 ports
External HDD, etc.)
USB2.0: 2 ports
12-24 VDC
Rectifier
RU-1746B-2
100/110/115/220/230 VAC,
1 , 50/60 Hz
Ø
12-24 VDC
Rectifier
RU-1746B-2
100/110/115/220/230 VAC,
1 , 50/60 Hz
Ø
*1
: A maximum of four USB devices including RCU-026 can be connected to the processor unit.
*2
: To use the USB port on the RCU-026, connect the RCU-026 to the USB port on the processor unit, using
the USB cable supplied with the RCU-026. If you do not use the USB port on the RCU-026, the USB
connection between the RCU-026 and processor unit is not required.
*3
: To extend the distance between the processor unit and the monitor unit/USB device, use the optional
DVI/USB repeater.
Note: The sub monitor cannot display the same screen as the main monitor.
Monitor Unit
NMEA0183
5 ports
Processor Unit
USB
FSS-301
Transceiver Unit
FSS-302
Transducer
*3
HDMI
Trackball Control Unit
2 ports
RS-485
USB *2
Trackball Control Unit
RS-485
USB *2
LAN
External KP
: Standard supply
: Optional/local supply
RCU-026
USB Device
RCU-026
USB Device
*2
*2
iii