Restore Factory Default Settings - Furuno FCV-600 Operator's Manual

3. MAINTENANCE, TROUBLESHOOTING
3.8

Restore Factory Default Settings

You can restore default menu settings (except language) as follows.
1. Press the MENU/ESC key to open the menu.
2. Select [Service], then press the KNOB.
3. Select [Factory Default Settings], then press the KNOB.
4. Select [Yes], then press the KNOB.
The unit beeps, the startup screen appears, then the [Installation] menu appears.
5. Select the appropriate language, then press the MENU/ESC key twice.
The transducer settings will also return to the factory defaults, make sure to set
the transducer settings (see section 2.8).
3-8