SIIG AV-GM07J3-S1 Manual

16x16 hdmi deep color & full 3d over single cat.x matrix

Advertisement

Quick Links

16x16 HDMI Deep Color & full 3D over single
Cat.X Matrix
To avoid EMI issue, complete STP Cat6 cable is strongly recommended!
P/N: AV-GM07J3-S1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AV-GM07J3-S1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for SIIG AV-GM07J3-S1

  • Page 1 16x16 HDMI Deep Color & full 3D over single Cat.X Matrix To avoid EMI issue, complete STP Cat6 cable is strongly recommended! P/N: AV-GM07J3-S1...
  • Page 2: Table Of Contents

    However, like all electronic equipments, the AV-GM07J3-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
  • Page 3: Introduction

    ● Easy installation with rack-mounting and wall-mounting designs for master and receiver respectively ● Fast response time – 2~5 seconds for channel switch PACKAGE CONTENTS ● 1x AV-GM07J3-S1 ● 1x UC AC Power cord ● 1x IR receiver ● 1x IR blaster* ●...
  • Page 4: Specifications

    * Additional IR remote controllers and IR blasters can be purchased as optional accessories to control the HDMI sources located separately. SPECIFICATIONS Model Name AV-GM07J3-S1 Technical AV-GM07J3-S1 MA-5288RX True 16x16 matrix switcher Role of usage Receiver [RX] Transmitter [TX] HDMI compliance HDMI Deep Color &...
  • Page 5 Earphone jack for IR receiver [IR] Receives IR commands from [System IR] Receives IR commands remote control from remote control Mechanical AV-GM07J3-S1 MA-5288RX Enclosure Metal case Model Dimensions Package (L x W x H) Carton Model Weight Package 3RU rack-mount with ears...
  • Page 6: Panel Descriptions

    PANEL DESCRIPTIONS Transmitting unit ► AV-GM07J3-S1-TX Front Panel Power Switch: Power ON/OFF switch Source Status: Input source indicator LED Output 7-segment LED: LED display for output ports IR SENSOR: IR sensor for receiving the IR commands from IR remote Input 7-segment LED: LED display for input channels...
  • Page 7: Receiving Unit ► Ma-5288Rx

    Ethernet: Ethernet control port All IR Output: 3.5mm IR blaster socket for HDMI source control on all 16 inputs System IR Receiver: Ext. IR receiver AC Power: 100-240V Receiving unit ► MA-5288RX Front Panel Rear Panel Signal Level: Adjust the 8-level equalization control to the received HDMI signals. The HDMI signal level varies from strongest (0) to weakest (7) for respective transmission length from longest possible range to short distance.
  • Page 8: Ir Pass-Through

    IR BLASTER: IR control on individual display device IR RECEIVER: IR receiver connected here can receive all IR command signals from the IR remote controls of AV-GM07J3-S1 and all other HDMI source devices. CAUTION! Incorrect placement of IR Blaster and Receiver may result in the failure of the IR extenders.
  • Page 9: Hardware Installation

    2. Connect each CAT.X output port on the AV-GM07J3-S1 to respective CAT.X input on the remote receiver MA-5288RX. 3. Connect IR blaster to the AV-GM07J3-S1 and direct the IR blaster to point towards the built-in IR receiver of the HDMI source devices.
  • Page 10: Connection Diagram

    CONNECTION DIAGRAM...
  • Page 11: Operation Approach

    OPERATION APPROACH Method A: Push-in Button 1. IN/OUT MAP 1) Use the “ ”or “ “ output push button to select the number of display 2) Use the “ ”or “ “ input push button to select the number of input source “...
  • Page 12 audio STATUS Preset output status Reserved Reserved Reserved Reserved 7-Segment Operation Procedure Switch + number(output) + To + number(input) + IN/OUT Switch Take --;-- 1.Press “SWITCH” button 04;-- 2.Press number key “4” to select Output Ex1: Input 3 3.Press “To” button To Output 4 04;03 4.Press number key “3”...
  • Page 13 02;All Input All 2.Press number key “2” to select default EDID 3.Press “TAKE” button Save Current Mapping Save + number(1-8 storage site) + Take SA;VE 1.Press “SAVE” button Ex: Save current 00;05 2.Press number key “5” to select the storage site mapping to 5 3.Press “TAKE”...
  • Page 14 Method C: Software Control through RS-232 port / Ethernet port System Requirement 1) OS Information: MS WinXP/7 2) Baud rates: 9600 3) Software size: 3 MB 4) Minimum RAM requirement: 256 MB Version Button for FW/ SW EDID Button RS-232 Button Firmware Update Button Ethernet Button Network Button...
  • Page 15 Step4: Make sure the connection status is on connected status “ ” 3. FW/SW Version Button Click “ ” button to show version information 4. RS-232 Button 1) Click “ ” button to switch to RS-232 function. 2) If RS-232 is connected, the button will show the sign image to let you know. 5.
  • Page 16 9. Power On/Off Button Click this button to power on/off “ ” Power on status(Blue): Click this button to power off device(Standby Mode) “ ” Power off status(Red): Click this button to power on device 10. EDID Button 1) Learn EDID from Default a) Select Default EDID(1-8 Default EDID) b) Select Input c) Click “Learn”...
  • Page 17 a) Select Input b) Click “Load” button to select the EDID file 3) Create EDID File a) Click “Create” button to create EDID file b) Select the EDID content c) Click “Save EDID on Computer” to save the generated EDID as a file 4) View EDID content a) Select Input, HDMI output, or From File b) Click “View”...
  • Page 18 c) Click “Save As” to save the read EDID as a file on computer 11. Firmware Update Button 1) Make sure RS-232 is connecting and the connecting status is “ ” 2) Click ”FIRMWARE UPDATE” Button and then will be a pop-up windows 3) F/W Update for Control Board Step1: Click “Load File”...
  • Page 19 Step2: Power OFF the AV-GM07J3-S1 Step3: Power ON the AV-GM07J3-S1 Step4: Click “Start” button and the firmware will start writing 4) F/W Update for Input and Output Card Step1: Click “Load File” to select the firmware file which you want to update...
  • Page 20 12. Network Button Step1: Make sure the connection status is on connected status “ ” Step2: Connect matrix to network through IP control port Step3: Click “NETWORK” Button and then will be a pop-up windows Step4: Click “Read From Device” to read the device IP address Step5: Select “Ethernet”...
  • Page 21 13. Mapping Button 1) Save Mapping: a) Select Mapping(1-8) b) Click “Save” button to save current mapping 2) Preset Mapping: a) Select Mapping(1-8) b) Click “Recall” button to recall previous mapping which are saved 3) Rename Mapping: a) Rename the mapping(Mapping1-Mapping8) b) Click “Confirm”...
  • Page 22 15. In/Out Switch Button Click the button on the checkerboard to select Input & Output port User can click the input number button to let all outputs select the same input Ex: All outputs select input 1...
  • Page 23 16. Mute Output Button Click the circle button to turn off output’s video and audio Ex: Mute Output 2...
  • Page 24 Method D: Web Interface Control 1. Set up PT-MA-HD1616-C IP address (Please refer to Network setting section) 2. Key in the IP address on the web page...
  • Page 25: Edid Learning

    EDID LEARNING The EDID learning function is only necessary whenever you encounter any display on the HDMI output port that cannot play audio and video properly. Because the HDMI source devices and displays may have various level of capability in playing audio and video, the general principle is that the source device will output the lowest standards in audio format and video resolutions to be commonly acceptable among all HDMI displays.
  • Page 26: Faq

    The quality of output video is not good enough, how can I do? Please adjust the 8-level equalization on the receiver units. The HDMI signal level varies from 0 (strongest) to 7 (weakest) for respective transmission length from longest possible range to short distance.
  • Page 27: Notice

    user sets the matrix at 1080p and 7.1ch, the source will only play the content under this format. Therefore if the TV cannot decode 7.1ch audio, there is definitely no audio. NOTICE 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI/HDMI EDID information.
  • Page 28: Warranty

    The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the AV-GM07J3-S1 features and specifications is subject to change without further notice.

Table of Contents