Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SIIG AV-GM0743-S1
Summary of Contents for SIIG AV-GM0743-S1
- Page 1 2x4 HDMI 1.3 Matrix P/N: AV-GM0743-S1...
-
Page 2: Safety And Notice
However, like all electronic equipments, the AV-GM0743-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. - Page 3 HDMI sources to the any four displays at the same time. This solution is well suited for use in home theater, conference room presentation systems, or other similar setting or application. AV-GM0743-S1 HDMI cable Blu-ray disc player...
- Page 4 Features State-of-the-art Silicon Image (founder of HDMI) chipset embedded for upmost compatibility and reliability HDMI 1.2a/1.3c* compliant HDMI 1.2a for AV-GM0743-S1 v1.2 HDCP compliant HDMI 1.3c for AV-GM0743-S1 v1.3 Allows any source to be displayed on multiple displays at the same time ...
-
Page 5: Specifications & Package Contents
HDMI compliance [AV-GM0743-S1 v1.2] – HDMI 1.2a [AV-GM0743-S1 v1.3] – HDMI 1.3c HDCP compliance [AV-GM0743-S1 v1.2] – Single-link 165MHz [4.95Gbps] Video bandwidth [AV-GM0743-S1 v1.3] – Single-link 225MHz [6.75Gbps] Video support 480i / 480p / 720p / 1080i / 1080p60 12-bit color Audio support Surround sound (up to 7.1ch) or stereo digital audio... - Page 6 1x IR remote ~ 5 ~...
-
Page 7: Panel Descriptions
Panel Descriptions Front Panel 1. Port 1: Push button for input switch on output port 1. 2. Select 1-2: Green LED lights up indicating the selected HDMI input for output port 1. 3. HP1: Hot-plug LED lights up indicating a valid connection status on output port 1. 4. -
Page 8: Rear Panel
Rear Panel 16 17 18 19 16. ON – OFF: Power ON/OFF switch. 17. RS-232: Connect to a PC for RS-232 serial control. 18. +5V DC: Connect to a 5V DC power supply unit and with a C5-type power cord. 19. -
Page 9: Dip Switch
DIP Switch for EDID/Audio SW1-SW2 DIP Switch Position Video Audio Description Pin#1 Pin#2 Up to Stereo Default Mode – Up to 1080p & stereo audio output OFF [] OFF [] 1080p for most HDTVs Up to Safe Mode – Enforce the system output at OFF [] ON [] 720p /... - Page 10 for firmware update (for technical support only) SW Main DIP Switch Position Pin#1 Pin#2 Pin#3 Pin#4 Normal Operation OFF [] OFF [] ON [] OFF [] Mode Firmware Update ON [] ON [] OFF [] OFF [] Mode Note Factory default for SW Main: Pin#1-OFF [] , Pin#2-OFF [] , Pin#3-ON [] , Pin#4-OFF [] . PLEASE MAINTAIN THIS SETTING AT ANYTIME FOR REGULAR USE! Sequence for firmware update [1].
-
Page 11: Hardware Installation
Hardware Installation MX-5124H 1. Connect all sources to HDMI Inputs on the 2x4 HDMI Matrix 2. Connect all outputs to HDMI devices 3. Connect the +5V 6A DC power supply to the 2x4 HDMI Matrix 4. Power on the 2x4 HDMI Matrix MX-5124H EDID Learning The EDID learning function is only necessary whenever you encounter any display on the HDMI output port that cannot play audio and video properly. -
Page 12: Operation And Ir Control
1. Power up the matrix master unit. Connect the HDMI display that its EDID needs to be learned to either/both of the HDMI INPUT 1 & INPUT 2 port where your source device has trouble to show the picture normally. 2. - Page 13 Input-Output Channel Setup: A. Input Output Click on either input button then click on the output buttons to assign them playing the selected input channel. B. Output Input Click on either output button then a quick selection table of inputs will show up.
- Page 14 Scan: Choose COM port number and Device ID for scan. Then tick “Scan Device ID” and press “Scan” button to know which COM port is connected based on this Device ID. Linkage: Indicate the connection status. Open: Open the COM port after scan to establish the connection between PC and the matrix. Close: Release the COM port after scan.
-
Page 15: Rs-232 Transmission Format
RS-232 Commands RS-232 transmission Format Baud rate: 9600 Data bit: 8 Parity: None Set Command Command Code Response Description Data Check SUM 0x08 0x4d 0x41 0x51 0x44 0x05 0x31~0x2f 0xaa SET MA-5144 Device *0x01~0xff 0x0c 0x4d 0x41 0x51 0x44 0x0c+…+port4 0xaa Set MA-5144 Source Device_Id 0x02 port1 port2 port3... - Page 16 IR Direct Code Default Custom Code — IR2 Code: 00 POWER — Function 0x02 0x17 0x0A 0x0C SOURCE SEL. 1 SOURCE SEL. 2 0x54 0x55 0x57 0x58 0x59 0x06 Output Port 1 Input 1- 0x18 Input 2 - 0x5B Output Port 2 Input 1 - 0x1B Input 2 - 0x5A Output Port 3...
- Page 17 Command Custom Code 0x00 0xFF 0x12 0x21 0x13 0x31 For further information, please check the installation CD. ~ 16 ~...
-
Page 18: Limited Warranty
Limited Warranty The SELLER warrants the AV-GM0743-S1 2x4 HDMI 1.3 Matrix to be free from defects in the material and workmanship for 3 years from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 3 years warranty... - Page 19 Support For more info or tech support http://www.siig.com/support April, 2018 ~ 18 ~...
Need help?
Do you have a question about the AV-GM0743-S1 and is the answer not in the manual?
Questions and answers