Basic operation
Basic operation
You can find out everything you need to
know about operating your appliance
here.
Opening appliance door
Open the appliance door.
●
Switching on the appliance
Press
.
●
The Eco 50° programme is set by de-
fault.
The Eco 50° programme is an espe-
cially environmentally friendly pro-
gramme and ideal for normally
soiled tableware. It is the most effi-
cient programme for the combina-
tion of energy/water consumption
for this type of tableware and evid-
ences conformity with the EU Eco-
design Directive.
If you do not perform any actions on
the appliance for 15 minutes, the ap-
pliance will automatically switch off.
Setting a programme
To adjust the wash cycle to the soiling
level of the tableware, select a suitable
programme.
Press the right programme button.
●
The programme is set and the pro-
a
gramme button flashes.
Setting additional functions
You can set additional functions to com-
plete the washing programme selected.
Note: The additional functions which
can be used depend on the programme
selected.
Press the button for the relevant ad-
●
ditional function.
The additional function is set and the
a
additional function button flashes.
Setting timer programming
You can delay the start of the pro-
gramme by up to 24 hours.
Press
.
1.
"h:01" appears in the display.
a
Use
or
to set the required start
2.
time for the programme.
Press
.
3.
This activates timer programming.
a
Tip: To deactivate timer programming,
press
or
repeatedly until "h:00"
appears in the display.
Starting the programme
Press
.
●
The programme has ended when the
a
display shows "0:00".
Notes
If you want to add more tableware
●
while the appliance is running, do
not use the tablet collecting tray as a
handle for the top basket. You might
touch the partially dissolved tablet.
You can only change a programme
●
when running if you cancel it.
→ "Terminate programme", Page 37
The appliance switches off automat-
●
ically 1 minute after the end of the
programme to save energy. If you
open the appliance door immediately
after the programme has ended, the
appliance will switch off after 4
seconds.
36
Need help?
Do you have a question about the PROFFSIG and is the answer not in the manual?