Drinking Water Connection; Electrical Connection - IKEA PROFFSIG Manual

Drinking water connection

Connect your appliance to a drinking
water connection.
Installing the drinking water
connection
Note: If you are replacing the appli-
ance, you must use a new water supply
hose.
Consult the installation instructions
1.
supplied for the steps required here.
Connect the appliance to the drink-
2.
ing water connection using the en-
closed parts.
Observe the Technical data
→ Page 58.
When doing so, check that the drink-
3.
ing water connection is not kinked,
crushed or twisted.

Electrical connection

Connect your appliance to the power
supply.
Connecting the appliance to
the electricity supply
Notes
Follow the Safety instructions
●
→ Page 6.
Connect the appliance to alternating
●
current only, in the range of 220 -
240 V and 50 Hz or 60 Hz.
Please note that the water safety sys-
●
tem is only functional if there is a
power supply.
Insert the non-heating appliance
1.
plug of the power cable into the ap-
pliance.
Insert the mains plug of the appli-
2.
ance into a nearby socket.
The connection data for the appli-
ance can be found on the rating
plate.
Check that the mains plug is inserted
3.
properly.
15