Basic Settings; Overview Of Basic Settings - IKEA PROFFSIG Manual

Basic settings

Basic settings
You can configure the appliance to meet your needs.

Overview of basic settings

The basic settings depend on the features of your appliance.
BASIC SETTING
Water hardness
Rinse aid dispens-
ing
Intensive drying
Hot water
DISPLAY SELECTION
TEXT
H:04 H:00 - H:07
r:05 r:00 - r:06
d:00 d:00 - d:01
A:00 A:00 - A:01
DESCRIPTION
Set the water softening sys-
tem to your water hardness.
→ "Setting water softening sys-
tem", Page 27
Level H:00 switches the water
softening system off.
Set the amount of rinse aid to
be dispensed.
→ "Setting the amount of rinse
aid", Page 29
Switch the rinse aid system
off with level r:00.
The temperature is increased
during the final rinse, which
improves the drying result.
This may increase the run
time slightly.
Note: Not suitable for delic-
ate items of tableware.
Switch Extra Dry on "d:01" or
off "d:00".
Set cold water or hot water
connection. Only set the ap-
pliance to hot water if this can
be prepared with little energy
and a suitable installation is
available, e.g. solar heating
system with circulation line.
The water temperature
should be at least 40 °C and
max. 60 °C.
Switch hot water on "A:01" or
off "A:00".
38