E-664 LVPZT Position Servo Controller
User Manual PZ 99E
4.
Block Diagram
Servo-control functions are implemented on an E-802 submodule. The respective
User Manual provides detailed information.
Fig. 2 E-664 block diagram
Note: The potentiometer labelling P1-P5 shown above is that used on the E-802.55-type
plug-in submodules, on which these functions are implemented. Some earlier E-802
versions, while pin-compatible, use different component designations (see the E-802 User
Manual for details).
Zero adjust is front-panel accessible. See the following pages for details.
Release 1.0.4
www.pi.ws
Page 9