Advantech AIR-200 User Manual page 29

3.2.2.6 AMT Configuration
Feature
Intel AMT
BIOS Hotkey Pressed
MEBx Selection
Screen
Hide Un-Configure
ME Confirmation
Prompt
MEBx Debug Mes-
sage
Un-Configure ME
AMT Wait Timer
ASF
Activate Remote
Assistance Process
USB Provisioning of
AMT
PET Progress
Option Description
Enable/Disable Intel ® Active Management Technology
BIOS Extension. Note: iAMT H/W is always enabled.
Disabled
This option just controls the BIOS extension execution. If
Enabled
enabled, this requires additional firmware in the SPI
device.
Disabled Enable/Disable BIOS hotkey press. Enable this feature
Enabled will show hotkey prompt at booting up screen
Enable/Disable MEBx selection screen at booting up.
Disabled
This feature allows to enter ME configuration screens
Enabled
OR initiate a remote connection.
Disabled Hide Un-Configure ME without password Confirmation
Enabled Prompt
Disabled Enable MEBx debug message output. This feature is for
Enabled debug purpose only.
Disabled Use this item to enable/disable un-configure ME without
Enabled password.
Set timer to wait before sending
0 ~ 65535
ASF_GET_BOOT_OPTOINS
Disabled Use this item to enable/disable Alert Specification For-
Enabled mat.
Disabled Use this item to enable/disable trigger CIRA (Client Initi-
Enabled ated Remote Access) boot.
Disabled
Enable/Disable of AMT USB Provisioning
Enabled
Disabled User can Enable/Disable PET Events progress to
Enabled receive PET events or not
21 AIR-200 User Manual