Usage - Main Menu Settings; Operation Setting - Mitsubishi Electric TC-24B Instruction Book

Usage - Main Menu settings

Operation setting

Time and Schedule
1
Main Menu > Operation Setting
Main Menu > Operation Setting > Time and Schedule
Setting the date, time, and display format
A
Main Menu > Operation Setting > Time and Schedule > Date and Time
Date tab
1
3
5
30
A
B
C
Time tab
4
3
5
1. Touch the [Date and Time] button on the [Time and Schedule] screen.
A
2. On the [Date and Time] screen, touch the
3. Using the buttons, set the following items: "Month/Date/Year" and "Hour/Minute/AM·PM".
3
4. On each tab, select one of the three display formats by checking the
format.
5. Touch the button to access the [Daylight saving changes] screen.
5
• Touching the button
1
Select "Not used" if you do not use daylight saving time.
2 • If your county does not exist in the list, select "Manual".
The buttons become active. Touching the buttons
7
3
Set the start and end date/time.
Daylight saving time setting screen
6. Touch the [Save] button.
8
• The initial date/time setting is 1/1/2013 12:00AM.
• If the clock is set forward, the operations that were scheduled to have taken place before the new
time will be cancelled.
• When the Daylight Saving Time goes in effect, the scheduled operations or the Setback operations
scheduled for the skipped hour cannot be executed.
• When "Clock Setting Signal" is set to OFF on the [Initial Settings 1/Basic System] screen under the
Service Menu, the daylight saving time function is not available.
2
4
8
Usage - Main Menu settings - Operation setting
[Date] tab to set the date, or
1
displays a list of countries. Select your country.
6
displays the date and time setting screen.
7
Date and time setting screen
6
7
[Time] tab to set the time.
2
checkbox next to the desired
4
31