Main Menu Screen - Mitsubishi Electric TC-24B Instruction Book

Main Menu screen

The Main Menu screen allows the user to configure the basic settings.
To access the Main Menu, touch the
screen.
1
2
3
4
2
▌ Home button
1
Accesses the Home screen.
▌ Back button
2
Returns the screen to the previous screen.
(When touched on the Main Menu, returns to the Home screen.)
▌ Touch Panel Cleaning button
3
Touch this button to access the screen that will not respond when touched (except when the numbers
in the four corners are touched in a specified order), allowing the user to clean the touch panel without
accidentally changing the settings.
▌
Service Menu button
4
Accesses the maintenance menu for service personnel. Normally, general users do no need to change
any settings in the maintenance menu.
28
icon at the right top corner of the Home or the Main Menu
▌ Operation Setting
1
(1) Time and Schedule
(2) Collective Operation
Setting
1
(3) Group Icon Setting
▌
Restriction Settings
2
(1) Lock Buttons
(2) Set Temperature Range
Limit
(3) Prohibit Remote Controller
3
4
▌ Control Panel
3
(1) Display Format
(2) Volume Control
(3) Touch Panel Calibration
▌ System Management
4
P60
(1) Status List
(2) System-Changeover
Sets the date, time, schedules, and daylight saving changes.
Selects the groups that the operation applies to when the ON/
OFF, Hold, or Setback button is pressed.
Changes the behavior of the group icon on the Home screen.
* Three setting options are available.
Locks the buttons and the functions on the TC-24B.
Sets the temperature range for the local remote controllers.
Prohibits access to the ON/OFF, Mode, Set Temperature,
Maintenance sign (Filter sign/Check Water sign) Reset,
Fan Speed, and Air Direction settings from the local remote
controllers, and also deactivates Timer settings from the local
remote controllers.
Selects the display formats*.
* Display language, temperature unit, display or non-display of
room temperature and Cooling/Heating mode icons (during
Auto mode), and backlight timer, and group names.
Sets the sound volume and screen brightness.
Calibrates the touch panel.
Displays errors and maintenance signs.
Selects the System-Changeover* setting.
* Automatically switches the entire system to Cooling or
Heating based on the room temperature and the preset
temperature of each group.
Main Menu screen
P30
P40
P43
P44
P46
P48
P50
P54
P55
P56
P58
29