Mitsubishi Electric TC-24B Instruction Book page 22

Usage - Main Menu settings - Operation setting
To select the groups on which to execute the Hold function
1. Touch the [Hold] button on the [Collective
B
Operation Setting] screen.
2. Read the pop-up message, and touch the [OK]
button to confirm.
3. Select the groups to include from the group icons
labeled . By default, all groups are selected.
1
4. Touch the [Save] button.
2
To select the groups on which to execute the Collective ON/OFF function
1. Touch the [ON/OFF] button on the [Collective
C
Operation Setting] screen.
2. Read the pop-up message, and touch the [OK]
button to confirm.
3. Select the groups to include from the group icons
labeled . By default, all groups are selected.
1
4. Touch the [Save] button.
2
• The DIDO controller groups that do not support the Collective ON/OFF function cannot be selected.
42
Show Group Name List button
Shows a list of group names in a pop-up
window.
1
Select All button
2
Selects all groups.
Show Group Name List button
Shows a list of group names in a pop-up
window.
1
Select All button
2
Selects all groups.
To make Group icon settings
3
Main Menu > Operation Setting
Main Menu > Operation Setting > Group Icon Setting
Touch the [Group Icon Setting] button on the [Operation Setting] screen.
3
1
2
1. Select among Group icon setting 1, Group icon setting 2, and Group icon setting 3 by touching the
corresponding button labeled .
1
2. Touch the [Save] button.
2
Usage - Main Menu settings - Operation setting
1
2
3
Group icon setting 1
Stops or starts the operation of the specific group of
units when the group icon is touched.
Group icon setting 2 (default)
Allows the user to select multiple groups before jumping
to the GROUP screen. Touch the [Operate] button after
selecting groups to jump to the GROUP screen.
Group icon setting 3
Jumps to the GROUP screen when a group icon is
touched.
43