Mitsubishi Electric TC-24B Instruction Book page 13

Basic Operations - Operation screen (GROUP screen)
Interlocked ventilation units (LOSSNAY)/Fan speed/Air direction/
Louver settings
for Air conditioning unit groups only
Touch to show the Interlocked ventilation
4
units (LOSSNAY)/Fan speed/Air direction/
Louver settings screen.
4
: Interlocked ventilation units (LOSSNAY)
A
Stop Low High
* When interlocked ventilation units are not connected,
: Fan speed (settable only while the unit is in operation)
B
Quiet Low Medium High
* does not appear when the model does not have this function.
B
* Available fan speed varies depending on the model.
: Air direction (settable only while the unit is in operation)
C
Setting 1 Setting 2 Setting 3 Setting 4
* does not appear when the model does not have this function.
C
* Available air direction varies depending on the model.
: Louver (settable only while the unit is in operation)
D
ON OFF
* does not appear when the model does not have this function.
D
After setting through , touch the [OK] button.
A D
24
A C
B
does not appear.
A
Auto
Setting 5 Swing Auto
Hold function setting
HOLD-ON
Touch to enable/disable the Hold function.
5
* When the Hold function is enabled, the current operation status is retained until the Hold function is
disabled.
* The timer execution is prohibited when this function is enabled and the icon
* The operations that have been scheduled from the other system controllers or remote controllers will also
be disabled.
* If the Hold setting is set to ON from the GROUP screen or with the HOLD button next to the touch panel
and the "Hold type" is set to "Forced", the Hold setting can be cancelled only from this unit. If the "Hold
D
type" is set to "Normal", the Hold setting can be cancelled from this unit, other system controllers, or
remote controllers.
* When remote controllers, system controllers, or units that do not support the Hold function are connected,
only the scheduled operations for this unit will be disabled.
* Refer to the Installation Manual for how to change the "Hold type".
Basic Operations - Operation screen (GROUP screen)
HOLD-OFF
is displayed.
25