Install Cabinets; Install Cabinet Hanger Pins On The Backside; Figure 50: Wall Mounting: Installation Order Of Cabinets (4×4 Frameset); Figure 51: Installing The Cabinet Hanger Pins - NEC FA Series User Manual

6.3 Install Cabinets

This section is a guide to mounting the cabinets onto the frame support and describes the
following in more detail:
 Prepare the cabinets for installation.
 Install the first row of cabinets
 Fix the first row of cabinets to the Power bar.
 Install further cabinets.
 Align all cabinets of the LED Wall to achieve an even surface.

Table 10: Cabinet Installation Requirements

No. of People 2
Prerequisites Frameset securely installed
Power bar securely installed
Tools Screwdriver
Allen key
Equipment Cabinets
Cabinet hanger pins
Cabinet alignment bracket
13 
9 
5 
1 
Figure 50: Wall Mounting: Installation Order of Cabinets (4×4 Frameset)

Install Cabinet Hanger Pins on the Backside

On the workbench, place cabinet front-side
down on a protected surface.
Install Cabinet hanger pins (2×) on
top left- and right-hand corners.
Secure the Cabinet hanger pins firmly.
14  15 
10  11 
6  7 
2  3 
16
12
8
4

Figure 51: Installing the Cabinet Hanger Pins

© NEC Corporation 2019 43