Figure 62: Frame Cover Links; Figure 63: Installing Top Frame Cover; Figure 64: Installing Side Frame Covers; Figure 65: Fastening The Side Frame Covers - NEC FA Series User Manual

Attach the frame cover links to the top frame
cover with the pre-installed screw (D).
Attach the frame cover sides to the frame
cover top and links with the pre-installed
screw (D)
With two people, carefully lift the frame
cover and place it onto the LED Wall.
Align the slot nuts in the frame covers with
the Cabinet interlock anchors.
Ensure there is no gap between the frame
cover sides and the side cover for the Power
bar.
Attach the frame cover sides to the LED Wall by screwing the M8×16 screws (C)
through the Cabinet interlock anchors into the slot nuts.

Figure 65: Fastening the Side Frame Covers

Slide the hooks on Power bar cover plate into the vertical key holes (E) on the Power
bar.
Push the Power bar cover plate firmly to the right so it stays in place.
E

Figure 66: Installing Power Bar Cover Plate

Figure 62: Frame Cover Links

Figure 63: Installing Top Frame Cover

Figure 64: Installing Side Frame
Covers
C
© NEC Corporation 2019
D
49