Switch from Sending Card tab to Screen Connection tab (see Figure 77).
Figure 77: Start Screen – Screen Connection (Default View) before Configuration
Click the Load from file button (see Figure 77).
Select the scr-file from the delivered USB flash drive and click Open button, confirm
the loading message with OK button.
Result: The scr-file will be loaded.
Click the Send to HW button to save the configuration. Confirm the upcoming pop-
up message with OK.
Result: The scr-file will be saved. After restart, the configuration is available.
Figure 78: Save Configuration
Notice
If you do not save the configuration, the system will start with the default settings.
© NEC Corporation 2019
55