Figure 102: Changing Monitoring Parameters; Figure 103: Start Screen Monitoring After Changing The Monitoring Parameters - NEC FA Series User Manual

Click the Configuration button. The Monitoring Parameter interface will open (see
Figure 102).

Figure 102: Changing Monitoring Parameters

Click the check box for the marked parameters (see Figure 102). Click the Save
button.
Result: The parameters are activated in the Monitoring interface (see Figure 103).
By moving the mouse over the screen mapping a pop-up appears, which offers
detailed information about the Receiving cards and the Power supply.

Figure 103: Start Screen Monitoring after Changing the Monitoring Parameters

© NEC Corporation 2019 70