Drill The Positions; Attach The Frame Supports; Figure 46: Wall Mounting: Attachment Of Frame Supports (5×5 Frameset); Figure 47: Using Alignment Bar With Spirit Level - NEC FA Series User Manual

Table 8: Number and Position for Anchor Points

Frameset: 4×4
Anchor Points 3 × 2
Horizontally ×
Vertically
Distance 608 mm
Horizontally
1026 mm
Distance
Vertically
Anchor size Ø10 mm

Drill the Positions

 Use required drilling equipment to drill on marked positions.
 If necessary, use screw anchors / raw plugs.
 Remove any debris and wipe away drill shaving and dust particles.

Attach the Frame Supports

Attach each vertical frame support onto the grid on the wall.
Check the distance of the frame elements using the Alignment bar.
Use the spirit level together with the Alignment bar to check the evenness (Figure 46
and Figure 47). If necessary, adjust the positions accordingly.
Figure 46: Wall Mounting: Attachment of Frame Supports
(5×5 Frameset)
5×5
4 × 3
608 mm
684 mm equally
Ø10 mm
Figure 47: Using Alignment
Bar with Spirit Level
© NEC Corporation 2019
6×6
5 × 3
608 mm
Distance top row –
middle row: 1026 mm
Distance middle row –
bottom row: 684 mm
Ø10 mm
41