Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Norac Manuals
  4. Paint Sprayer
  5. UC4.5
  6. Installation manual

Norac UC4.5 Installation Manual

Spray height control system main lift option – 44695-4 bracket
Hide thumbs Also See for UC4.5:

Advertisement

Quick Links

Download this manual
MO
Main Lift Option – 44695-4 Bracket
Installation Manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the UC4.5 and is the answer not in the manual?

Questions and answers

Related Manuals for Norac UC4.5

Summary of Contents for Norac UC4.5

  • Page 1 Main Lift Option – 44695-4 Bracket Installation Manual...
  • Page 2 Reorder P/N: 4572BC-INST Rev B (UC4.5 Main Lift Option – 44695-4 Bracket) NOTICE: NORAC Systems International Inc. reserves the right to improve products and their specifications without notice and without the requirement to update products sold previously. Every effort has been made to ensure the accuracy of the information...

  • Page 3: Table Of Contents

    Contents Introduction ........................ 1     Kit Parts ........................2     Main Lift Sensor Installation ..................3     Electrical Installation ....................5     Software Setup ......................6     Cable Drawings ......................7    ...

  • Page 4: Introduction

    1 Introduction Congratulations on your purchase of the NORAC UC4.5 Spray Height Control System. This system is manufactured with top quality components and is engineered using the latest technology to provide operating reliability unmatched for years to come. When properly used the system can provide protection from sprayer boom damage, improve sprayer efficiency, and ensure chemicals are applied correctly.

  • Page 5: Kit Parts

    MANUAL INSTALLATION UC4.5 MAIN LIFT OPTION - 44695-4 BRACKET Do not use high speed power tools/drills when installing hardware. The use of dielectric grease is not recommended on any NORAC electrical connections. To ensure all stainless steel hardware does not gall or seize apply a light coating of the supplied Permatex Anti-seize grease to all threaded parts upon installation.

  • Page 6: Main Lift Sensor Installation

    3 Main Lift Sensor Installation 1. There are a variety of ways to mount the main lift bracket on most sprayers. The bracket should position the sensor approximately in the center of the sprayer, forward of the boom. 2. Mount the ultrasonic sensor to the main lift bracket. Ensure sensor cable is securely fastened with cable-ties.
  • Page 7 Ultrasonic Sensor Mounting Guidelines The following guidelines will ensure optimal sensor performance and prevent sensor measurement error. 1. In its lowest position, the sensor must be 9 inches (23 cm) or more from the ground (A). 2. The centerline of the acoustic cone should be approximately vertical at normal operating heights (A).

  • Page 8: Electrical Installation

    4 Electrical Installation 1. Connect the main lift sensor to the 8-way coupler (E11) using cable C07 and the 2-way coupler (E12). Cable C07 and item E12 may not be needed if the 8-way coupler is mounted close enough to the main lift sensor. Figure 2: Electrical Connections Only components shown in black are included with this kit.

  • Page 9: Software Setup

    2. If any functions do not work, review this manual to check for proper installation. 3. Turn on the power for the control panel using the switch on the side of the chassis. 4. Refer to the UC4.5 Spray Height Control Operator’s Manual to run an automatic install.

  • Page 10: Cable Drawings

    6 Cable Drawings ITEM C07: 43220-01 - CABLE UC5 NETWORK 14 AWG - 1M...
  • Page 11 Canada NORAC Systems International Inc. Phone: (+1) 306 664 6711 Toll Free: 1 800 667 3921 Shipping Address: 3702 Kinnear Place Saskatoon, SK S7P 0A6 United States NORAC, Inc. Phone: (+1) 952 224 4142 Toll Free: 1 866 306 6722...