Table of Contents
Advertisement
30.
Only personnel authorised by this company can carry out maintenance
on the machine.
NOTE:
Device complies with IEC 61000-3-12.
ELECTROMAGNETIC COMPATIBILITY
The welding device is in terms of interference designed primarily for industrial
areas. It meets the requirements of EN 60974-10 class A and it isn't designed
for using in residential areas, where the electrical energy is supplied by public
low-voltage power supply network. It can be here potential problems with
ensuring of electromagnetic compatibility in this areas, due to interference
caused by power lines as well as the radiated interference. During operation,
the device may be the source of interference.
Caution
We warn users, that they are responsible for possible interference from
welding.
3. TECHNICAL DATA
Method
Mains voltage
Welding current range
Open-circuit voltage
U
20
Mains protection
Max. effective current
I
1eff
Welding current
(DC=100%) I
2
Welding current
(DC=60%) I
2
Welding current
(DC=x%) I
2
Protection
Standards
Dimensions (w x l x h)
generator
Weight
Linde AG, Linde Gas Deutschland continuously strives to produce the best
Linde AG, Linde Gas Deutschland ©
6/21
MIG/MAG
V/Hz
A
25 - 200
V
A
A
15,8
A
140
A
170
A
35%=200
EN 60974-1; EN 60974-10 class A
mm
kg
MMA
1x230/50-60
10 - 200
68
16 @
16,0
120
140
30%=200
IP 23S
251x540x395
16,5
TIG
10 - 200
13,2
150
180
40%=200
Advertisement
Table of Contents
