Table of Contents
Advertisement
4. To clean the welder, disconnect it from the mains supply voltage then open
the enclosure and use a vacuum cleaner to remove any accumulated dirt
and dust. The welder should also be wiped clean. If necessary, solvents that
are recommended for cleaning electrical apparatus may be used.
5. Troubleshooting and repairing of Ryval welding equipment should only be
carried out only by suitably qualified or competent person.
6. A 'competent person' must be a person who has acquired through training,
qualification or experience, or a combination of them, the knowledge and
skills enabling that person to safely carry out a risk assessment and repairs
to the electrical equipment in question.
7. The person carrying out the servicing needs and repairs must know what to
look at, what to look for and what to do.
10. STATEMENT OF WARRANTY
1. In accordance with the warranty periods stated below, Linde AG, Linde Gas
Deutschland guarantees the proposed product to be free from defects in
material or workmanship when operated in accordance with the written
instructions as defined in this operating manual.
2. Linde AG, Linde Gas Deutschland welding products are manufactured for
use by commercial and industrial users and trained personnel with
experience in the use and maintenance of electrical welding and cutting
equipment.
3. Linde AG, Linde Gas Deutschland will repair or replace, at its discretion, any
warranted parts or components that fail due to defects in material or
workmanship within the warranty period. The warranty period begins on the
date of sale to the end user.
4. If warranty is being sought, please contact your Linde AG, Linde Gas
Deutschland product supplier for the warranty repair procedure.
5. Linde AG, Linde Gas Deutschland warranty will not apply to:
6. Equipment that has been modified by any other party other than Linde AG,
Linde Gas Deutschland's own service personnel or with prior written
consent obtained from Linde AG, Linde Gas Deutschland Service
Department.
7. Equipment that has been used beyond the specifications established in the
operating manual.
8. Installation not in accordance with the installation/operating manual.
9. Any product that has been subjected to abuse, misuse, negligence or
accident.
10.
Failure to clean and maintain (including lack of lubrication, maintenance
and protection), the machine as set forth in the operating, installation or
service manual.
11.
Within this operating manual are details regarding the maintenance
Linde AG, Linde Gas Deutschland ©
20/21
Advertisement
Table of Contents
