Ozito JSW-4000U Original Instructions Manual page 8

Items supplied
Please check that the article is complete as Sound and vibration
specified in the scope of delivery. If parts are Sound and vibration values were measured in
missing, please contact our service center or the accordance with EN 60745.
sales outlet where you made your purchase at
the latest within 5 working days after purchasing L sound pressure level ........................ 86 dB(A)
pA
the product and upon presentation of a valid bill
K uncertainty ............................................. 3 dB
pA
of purchase. Also, refer to the warranty table in
L sound power level .......................... 97 dB(A)
the service information at the end of the operating WA
K uncertainty ............................................. 3 dB
instructions.
WA
•
Open the packaging and take out the equip-
Wear ear-muffs.
ment with care.
The impact of noise can cause damage to hea-
•
Remove the packaging material and any
ring.
packaging and/or transportation braces (if
available).
Total vibration values (vector sum of three direc-
•
Check to see if all items are supplied.
tions) determined in accordance with EN 60745.
•
Inspect the equipment and accessories for
transport damage.
Cutting wood
•
If possible, please keep the packaging until
Vibration emission value a
the end of the guarantee period.
K uncertainty = 1.5 m/s
Danger!
Cutting sheet metal
The equipment and packaging material are
Vibration emission value a
not toys. Do not let children play with plastic
K uncertainty = 1.5 m/s
bags, foils or small parts. There is a danger of
swallowing or suffocating!
The specified vibration value was established in
accordance with a standardized testing method. It
Proper use
may change according to how the electric equip-
The jigsaw is designed for sawing wood, metals,
ment is used and may exceed the specified value
non-ferrous metals and plastics using the approp-
in exceptional circumstances.
riate saw blade.
The specified vibration value can be used to
The equipment is to be used only for its prescri-
compare the equipment with other electric power
bed purpose. Any other use is deemed to be a
tools.
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
The specified vibration value can be used for initi-
ries of any kind caused as a result of this.
al assessment of a harmful effect.
Please note that our equipment has not been de-
Keep the noise emissions and vibrations to a
signed for use in commercial, trade or industrial
minimum.
applications. Our warranty will be voided if the
•
Only use appliances which are in perfect wor-
machine is used in commercial, trade or industrial
king order.
businesses or for equivalent purposes.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
Technical data
•
Do not overload the appliance.
Mains voltage: ........................ 230-240 V ~ 50 Hz
•
Have the appliance serviced whenever
Power consumption: .................................. 400 W
necessary.
Stroke speed: ..............................500 - 2,900spm •
Switch the appliance off when it is not in use.
•
Stroke height: ........................................... 18 mm
Wear protective gloves.
Cutting depth, wood: ................................ 55 mm
Cutting depth, plastic: .............................. 12 mm
Cutting depth, iron/Aluminium: ................... 6 mm
Miter cut: ........................ up to 45° (left and right)
Protection class: ...........................................II /
&
Caution!
Residual risks
Even if you use this electric power tool in ac-
cordance with instructions, certain residual
risks cannot be rules out. The following ha-
zards may arise in connection with the equip-
ment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protecti-
on is used.
3. Health damage caused by hand-arm vibra-
tions if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
= 7.06 m/s
2
h
2
= 5.10 m/s
2
h
2
For EU countries only
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EC
concerning old electric and electronic equipment
and its implementation in national laws, old elec-
tric power tools have to be separated from other
waste and disposed of in an environment-friendly
fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to
the manufacturer, the owner of the electrical
equipment must make sure that the equipment
is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal regulations.
This does not apply to any accessories or aids
without electrical components supplied with the
old equipment.
size 445 x 210 mm