The electric motor has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.
MFR-250 manual.qxd 1/12/11 11:24 AM Page 5 General Power Tool Safety Warnings - Personal Safety Warning! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
Page 6
MFR-250 manual.qxd 1/12/11 11:24 AM Page 6 General Power Tool Safety Warnings - Personal Safety e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
MFR-250 manual.qxd 1/12/11 11:24 AM Page 7 Additional Safety Instructions for Multi Function Tools This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
MFR-250 manual.qxd 1/12/11 11:24 AM Page 8 ASSEMBLY Attaching Your Accessory Accessory Drive Spindle fixed 1. To attach an accessory to the Multi Function Tool, to the Multi Function Tool ensure that the large hole located within the series of smaller perforated holes on the accessory is correctly placed over the drive spindle (4) of the Multi Function Tool.
MFR-250 manual.qxd 1/12/11 11:24 AM Page 9 ASSEMBLY (cont.) Changing Sanding Paper NOTE: The sanding pad (12) is a hook and loop baseplate covered with Velcro material. The sanding paper (11) can therefore be quickly and simply attached or removed from the Velcro fastening system.
Page 10
MFR-250 manual.qxd 1/12/11 11:24 AM Page 10 OPERATION (cont.) Choosing the Correct Sanding Paper Sanding paper (11) is rated according to the number marked on the rear of the sanding paper (11). The higher the number, the smaller and less coarse the particles are on the sanding paper (11).
Page 11
MFR-250 manual.qxd 1/12/11 11:24 AM Page 11 OPERATION (cont.) Sawing – Round Blade CAUTION: Clamp your workpiece securely if possible before commencing your work. NOTE: Ensure your blades are not blunt or damaged in any way before commencing your application.
Page 12
MFR-250 manual.qxd 1/12/11 11:24 AM Page 12 OPERATION (cont.) Scraping NOTE: The scraping blade is designed for scraping surfaces and the removal of soft materials. Ensure you have the correct angle and only apply light pressure to avoid cutting the surface.
Always replace both carbon brushes at the same time. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by mishandling of the tool.
MFR-250 manual.qxd 1/12/11 11:24 AM Page 14 DESCRIPTION OF SYMBOLS Volts Hertz Alternating current Watts /min Revolutions or No load speed reciprocation per minute Double insulated Regulator compliance mark Warning Read instruction manual CARING FOR THE ENVIRONMENT Power tools that are no longer usable should not be disposed of with household waste but in an environmentally friendly way.
MFR-250 manual.qxd 1/12/11 11:24 AM Page 15 CONTENTS 1 x Multi Function Tool MFR-250 1 x Allen key 1 x Side Handle 1 x Cutting blade round 1 x Washer 1 x Kit box 1 x Scraper blade 1 x Sanding pad...
PURCHASED FROM: ________________________________________________ DATE PURCHASED: ________________________________________________ 3 YEAR REPLACEMENT WARRANTY Your Ozito tool is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do it yourself) use only. WARNING The following actions will result in the warranty being void.
Need help?
Do you have a question about the mfr-250 and is the answer not in the manual?
Questions and answers