Ozito ROTARY TOOL SET Original Instructions Manual

Ozito ROTARY TOOL SET Original Instructions Manual

Rotary tool set

Advertisement

ROTARY
TOOL SET
170W
ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Voltage:
230-240V ~ 50Hz
Power:
170W
No Load Speed:
8,000 - 35,000/min
Collet Chuck Size:
ø 1.5 - 3.2mm
Flexible Shaft Length: 1.0m
Tool Weight:
1.5kg
ozito-diy.co.uk
All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the
manufacturer mentioned below are limited to either the rectification of said
defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).
OZITO UK
Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG

WARRANTY

- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.
4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Lithium
Ion batteries and chargers are covered by a 12 month warranty. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,
the work performed or parts fitted will not result in an extension of the
guarantee period, and no new guarantee will become active for the work
performed or parts fitted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk

WHAT'S IN THE BOX

Rotary Bits x 106
Flexible Shaft
Spanner
Spindle Lock Key
RTR-2000U
0516

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ROTARY TOOL SET and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito ROTARY TOOL SET

  • Page 1 (such as sand, stones or dust, transport damage), the use of force or damage caused by external forces (for example by dropping it). OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG 0516...
  • Page 2 KNOW YOUR PRODUCT SETUP & PREPARATION ROTARY TOOL 1. CHANGING ACCESSORIES 1 Collet Nut 5 Variable Speed Dial 2 Shaft Collar 6 On/off Switch 3 Spindle Lock Button 7 Hanging Ring WARNING! ENSURE ThE TOOL IS dISCONNECTEd fROM ThE pOWER SUppLY bEfORE pERfORMING ANY 4 Accessible Brushes 8 Power Cord Of ThE fOLLOWING OpERATIONS.
  • Page 3 2. CHANGING ACCESSORIES CONT. 3. FLEXIBLE SHAFT Locating a cutting/sanding disc 1 Remove the shaft collar. 2 Loosen the collet nut. 1 Remove the screw from the end of the disc holder. 2 Fit the fibre flange either side 3 Tighten the cutting disc onto 3 Raise the handle end of of the cutting disc, then insert the cutting disc holder.
  • Page 4 OPERATION 4. CONTROLS Variable Speed dial WARNING! ThE TOOL IS RECOMMENdEd fOR USE WITh A RESIdUAL CURRENT dEVICE (RATEd AT 30mA OR LESS). The speed of the tool can be regulated to suit a variety of applications and materials. Low speed use: Best for polishing applications and delicate projects On/Off Switch such as fragile model parts.
  • Page 5 5. OPERATING THE ROTARY TOOL 1 Turn the rotary tool on. 2 Select the appropriate speed for the application. 3 For high precision applications such as engraving or milling, hold the rotary tool like a pen. 4 For heavy work like cutting or grinding, hold the rotary tool in the palm of your...
  • Page 6 ROTARY BITS ACCESSORY GUIDE TYPE QTY/ SIZES INCLUDED APPLICATIONS ASSEMBLY 1.6mm x1 Collet 2.4mm x1 different shank sizes, to your rotary tool. 3.2mm x1 3.2mm x1 (Fitted) A mandrel is a shank to which polishing Mandrel accessories, cutting wheels and sanding A shank which screws into the felt Screw Mandrel polishing tip and wheels.
  • Page 7 Replace the extension lead if damaged or defective. Note: Ozito Industries will not be responsible for any When using an extension lead on a reel, always unwind the lead completely. Use of...
  • Page 8 GENERAL POWER TOOL SAFETY WARNINGS - PERSONAL SAFETY Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and finger on the switch or energising power tools that have the switch on invites accidents.
  • Page 9 Additonal operating & safety instructions Rotary Tool the following product Please note that the following parts of this product are subject to normal or natural wear and that the following parts are therefore also required for use as consumables. Rotary Tool RTR-2000U (Ozito) Category Example 2014/29/EU...
  • Page 10 Items supplied Technical data Caution! Please check that the article is complete as Operating voltage of the drive unit: ....... Residual risks specified in the scope of delivery. If parts are ..........230-240 V~ 50 Hz Even if you use this electric power tool in ac- missing, please contact our service center or the cordance with instructions, certain residual Power input: ..........

Table of Contents

Save PDF