Ozito OZMFS65WAU Original Instructions Manual

Ozito OZMFS65WAU Original Instructions Manual

Multi function sharpener

Advertisement

Quick Links

MULTI
FUNCTION
SHARPENER
65W
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Voltage:
230V ~ 50Hz
Motor:
65W
Duty Cycle:
S3 15%
No Load Speed:
6,700/min
Wheel Working Speed: 15.4m/s
Wheel Diameter:
49mm (2")
Sharpening Capacity
Drill bit: 3 - 10mm
Chisel & Blade: 6 - 51mm
Weight:
1.5kg
ozito-diy.co.uk
All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the
manufacturer mentioned below are limited to either the rectification of said
defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).
OZITO UK
Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
WARRANTY
- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.
4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Lithium
Ion batteries and chargers are covered by a 12 month warranty. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,
the work performed or parts fitted will not result in an extension of the
guarantee period, and no new guarantee will become active for the work
performed or parts fitted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
WHAT'S IN THE BOX
Multi-Function
Sharpener
OZMFS65WAU
0816

Advertisement

Table of Contents
loading

Summary of Contents for Ozito OZMFS65WAU

  • Page 1 Chisel & Blade: 6 - 51mm Weight: 1.5kg ozito-diy.co.uk OZMFS65WAU WARRANTY All of our products undergo strict quality checks to ensure that they reach - Damage to the device or parts of the device caused by normal or natural you in perfect condition. In the unlikely event that your device develops a wear or tear or by normal use of the device.
  • Page 2: Know Your Product

    KNOW YOUR PRODUCT SETUP & PREPARATION MULTI-FUNCTION SHARPENER 1 Bench Mounting Holes 4 Sharpening Wheel 1. CHANGING MODULES 2 On/Off Switch 5 Module Locking Clip Ensure the tool is disconnected from the power supply 3 Guide Rails before performing any of the following operations. It is recommended that the Multi-function Sharpener be bolted to a secure bench prior to operating.
  • Page 3: Operation

    OPERATION 2. CHISEL AND BLADE SHARPENER 3. SHARPENING KNIVES To reduce the risk of electrical shock, a residual current 1. Install knife and scissor 2. Switch on the power unit by device (rated 30mA or less) must be used. sharpener module by following pushing the switch to the on “I”...
  • Page 4: Sharpening Scissors

    12. Switch off the power unit after 11. Remove the clamp assembly sharpening. Ensure sharpening and rotate the drill bit 180° wheel has stopped before and repeat steps 5-10 for the changing modules. opposite side. OZMFS65WAU...
  • Page 5: Maintenance

    Spare parts can be ordered from the Special Orders Desk at your local Bunnings Warehouse or Homebase store. For further information, or any parts visit www.ozito-diy.co.uk or contact Ozito Customer Service: Great Britain: 0151 294 4488 Ireland: 1850 882711 E-mail: enquires@ozito-diy.co.uk...
  • Page 6: Electrical Safety

    ELECTRICAL SAFETY WARNING! If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a When using mains-powered tools, basic safety precautions, including the hazard. following, should always be followed to reduce risk of fire, electric shock, personal injury and material damage.
  • Page 7 Please note that the following parts of this product are subject to normal or natural wear and that the Additonal operating & safety instructions Multi Function Sharpener the following product following parts are therefore also required for use as consumables. Multi Sharpener OZMFS65WAU (Ozito) Category Example Wear parts*...
  • Page 8 The specified vibration value can be used for initi- Proper use old equipment. al assessment of a harmful effect. The Multi-Function Sharpener OZMFS65WAU has been designed for sharpening drill bits, kni- Keep the noise emissions and vibrations to a ves, scisors, chisels and blades.

Table of Contents