Know Your Product; Setup & Preparation; Changing The Blade - Ozito JSW-4000U Original Instructions Manual

KNOW YOUR PRODUCT

JIGSAW
1. Guide Roller
2. Variable Speed Dial
3. Adjustable Shoe
4. On/Off Switch
ACCESSORIES
8. Blade
9. Dust Extraction Adaptor
10. Hex Key
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
5. Lock On Switch
6. Soft Grip Handle
7. Dust Extraction Adaptor
SETUP & PREPARATION

1. CHANGING THE BLADE

Ensure the tool is disconnected from the power supply before
performing any of the following operations.
1. Use hex key to loosen
two blade securing
bolts.
2. Remove the blade.
3. Insert the replacement
blade into the blade
holder with the teeth
facing forward.
4. Tighten blade securing bolts.
6. Ensure the blade is within the groove of the guide roller.
5. Ensure the shoulder of
the blade sits right at
the bottom of the blade
holder.