Ozito OZJS400A Operation Manual
Hide thumbs Also See for OZJS400A:

Advertisement

Jigsaw
400 Watt
Operation Manual
3 Year Replacement Warranty
OZJS400A
0109
www.ozito.com.au
To view the full range visit:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OZJS400A and is the answer not in the manual?

Questions and answers

Summary of Contents for Ozito OZJS400A

  • Page 1 Jigsaw 400 Watt Operation Manual 3 Year Replacement Warranty OZJS400A 0109 www.ozito.com.au To view the full range visit:...
  • Page 2 SPECIFICATIONS - MODEL NO. OZJS400A Motor: 400W Input: 230V ~ 50Hz No load speed: 500 - 2,900 spm Stroke depth: 18mm Bevel: + / - 45° Blade fitment: Bayonet Tool weight: 2.0kg Cutting capacities: Timber 55mm Mild steel 6mm Plastic 12mm...
  • Page 3: Safety Instructions

    The electric motor has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito tools are interchangeable for Australia and New Zealand.
  • Page 4 GENERAL 1. Keep work areas clean. Cluttered work areas and benches can cause accidents. 2. Consider work area environment. Do not expose your tool to high humidity or rain. Do not use your tool in damp or wet conditions. Keep the work area well lit.
  • Page 5 GENERAL (cont.) 13.Check for damaged parts. Before use carefully check the tool and power lead for damage. Check for misalignment and seizure of moving parts, breakage of parts, damage to guards and switches and any other conditions that may affect its operation. Ensure that the tool will operate properly and perform its intended function.
  • Page 6 SAFETY INSTRUCTIONS FOR JIGSAWS • Pull out all nails in the material before starting to saw. Cutting nails may damage your tool. • Do not cut hollow pipe with the jigsaw. Do not cut material above the specified thicknesses stated within this manual •...
  • Page 7: Operation

    OPERATION Turning the Jigsaw On/off To turn on the jigsaw, squeeze the trigger. To turn off, release the trigger. The tool can be locked on for continuous use by squeezing the trigger fully and depressing the lock button, gently release both the lock on button and the trigger, the tool will continue to operate.
  • Page 8 OPERATION (cont.) Insertion and Removal of Blades Before performing any adjustments ensure Blade holder the tool has been switched off and is disconnected from any power supply. Turn the jigsaw upside down, and slide The dust shield towards the shoe as far as it will go.
  • Page 9 OPERATION (cont.) Cutting It is recommended to first mark your intended cutting line with a pencil or appropriate marker. Start the tool and wait a short moment until the blade achieves maximum speed. Put the bottom of the base on the work piece and move forward slowly along the cutting line.
  • Page 10: Maintenance

    Always replace both brushes at the same time. Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the tool by an unauthorised person or by...
  • Page 11 CONTENTS 1 x Jigsaw OZJS400A 1 x Allen key 1 x Blade 1 x Operation manual 1 x Dust extraction adaptor OZITO INDUSTRIES PTY LTD AUSTRALIA (Head Office) 1 - 23 Letcon Drive, Bangholme, Victoria, Australia 3175 Telephone: 1800 069 486 Website: www.ozito.com.au...
  • Page 12: Warranty

    PURCHASED FROM:__________________________________________________ DATE PURCHASED: __________________________________________________ 3 YEAR REPLACEMENT WARRANTY Your Ozito tool is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do it yourself) use only. WARNING The following actions will result in the warranty being void.

Table of Contents