Related Manuals for Vanco 280501
Summary of Contents for Vanco 280501
- Page 1 HDMI® Extender over Single Cat5e/6 Cable with IR Vanco Part Number: 280501 Technical Support www.vanco1.com • techsupport@vanco1.com • 800-626-6445...
-
Page 2: Dear Customer
DEAR CUSTOMER Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. This product is 100% inspected and tested in the United States to verify HDMI performance parameters. -
Page 3: Package Contents
Fully supports 1080p high definition resolution, multiple audio formats, and is HDCP compliant. In addition, IR pass-through allows for source control with IR accessories included. For extending HDMI over a single Cat5e/6 at a long distance, with IR, the 280501 is a great cost effective solution for any application! HDMI®... -
Page 4: Specifications
SPECIFICATIONS HDMI Compliance ............HDMI Deep Color 24/30 bit color depth, 3D HDCP Compliance ............Yes Video Bandwidth ............Single-link 165MHz (4.95 Gbps) Video Support ............480i/480p/720p/1080i/1080p @60 HDMI over UTP ............Full HD (1080p) - 60m (196ft) Audio Support ............Surround Sound (up to 7.1 ch) or stereo digital audio Input TMDS Signal ............. -
Page 5: Panel Descriptions
PANEL DESCRIPTIONS TRANSMITTER: 1. IR OUT for controlling the source 2. HDMI Input 3. 5V Power Supply Input 4. Reset Button: Press to reset the connection and automatically adjust for resolution 5. Cat5e/6 Output 6. Link Status Indicator: this will blink when there is no signal or weak signal coming from the source. A solid link LED light means you’ve have a good source signal. -
Page 6: Connect And Operate
CONNECT AND OPERATE 1. Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, etc. to the HDMI input on the Transmitting unit. 2. Connect a display such as an HDTV or HD Projector to the HDMI output on the Receiving unit. 3. -
Page 7: Reset Buttons
RESET BUTTONS The 280501 is equipped with RESET buttons on each unit, there is no need to adjust any dip switches or dials, the unit automatically adjusts gain when the RESET button is pushed on the RX unit. The RESET button on the TX unit resets the connection and automatically adjusts for resolution. - Page 8 IR RECEIVER (RX) To control the source: Plug iR Receiver into IR RX port of the receiver unit (280501-RX); place receiver at or near display To Control the Source: 1. Plug the IR Transmitter into the IR OUT Port on the...
- Page 9 NOTICE 1. Vanco HDMI and Cat5e/6 cables are strongly recommended for use with this product to ensure best results. 2. Incorrect placement of IR Transmitter and Receiver may result in the failure of the IR extenders. Please check carefully before plugging in the IR extender to the respective IR sockets.
-
Page 10: Troubleshooting
4. If you are still encountering issues, attempt the “hot-plug” concept. With all of the HDMI cables disconnected, turn on the source and plug in the HDMI cable into it’s output, then power up the Vanco unit and plug the HDMI cable into it’s input, finally turn on the display and plug the HDMI cable from the receiver into it. -
Page 11: Limited Warranty
If repairs are needed during the warranty period the purchaser will be required to provide a sales receipt/sales invoice or other acceptable proof of purchase to the seller of this equipment. The seller will then contact Vanco regarding warranty repair or replacement. - Page 12 Vanco® International 506 Kingsland Drive Batavia, Illinois 60510 call: 800.626.6445 fax: 630.879.9189 visit: www.vanco1.com...