Video Adapter - RadiSys PROCELERANT CE915GM Quick Start Manual

1
Checking your order
CE-PHS17A
Backer plate
CE-AHSA
Carrier screws
Heatsink screws
Heatsink spacer
Module screw
Standoffs
Washers

Video adapter

If you are using the CR100 carrier board and need to attach a VGA monitor to a DVI-I port, a
DVI-to-SVGA adapter is required. Refer to
information on VGA support on DVI-I ports.
Product Code
CE-DVI-VGA
10
package contents
Product code
41x36mm, sheet metal (supplied with four M2 flat head
screws)
Aluminum active fansink, 125x95x17mm, 12V input
M2.5x0.45x4mm, pan head (used to tighten the carrier
board and module)
M2.5x0.45x16mm, pan head (used to tighten the heatsink
and module)
M2.5 clear, 4.5mm outside diameter, 6mm long
M2.5x0.45x12mm, pan head (used with the heatsink
spacer)
M2.5x0.45x5mm, hex jam, 4.5mm outside diameter
2.5mm inside diameter, spring lock (used with heatsink
screws)
Description
DVI-to-SVGA adapter
Description
DVI and VGA Monitors
QTY Part number
1 010-02709-00xx
1 019-00352-00xx
5 09-0293-00xx
5 009-01707-00xx
1 009-01587-00xx
1 09-0344-00xx
5 009-01190-00xx
5 009-01208-00xx
on page 13 for further