Preface; About This Guide; Where To Get More Information; Safety Notices - RadiSys PROCELERANT CE915GM Quick Start Manual

PREFACE

About this guide

Procelerant™ COM Express™ family products are designed to provide a wide range of processor
options enabling high reuse and interchangeability of COM Express modules and carrier boards.
Additionally, all CE915GM COM Express modules, their heatsink assemblies, and the CR100
carrier boards are RoHS compliant.
This guide is for the technician or engineer who will physically install the Procelerant COM
Express embedded computing module on an application-specific carrier board. The Procelerant
CR100 FlexATX carrier board was designed for this purpose, and is used as the sample carrier
board in this guide.
For detailed information and technical specifications, refer to the Procelerant CE915GM COM
Express Module Product Manual available on the RadiSys Web site, www.radisys.com.
For information about the CR100 carrier board, refer to the Procelerant CR100 FlexATX Carrier
Board Product Manual.

Where to get more information

Please visit the RadiSys
resources. Downloads (manuals, release notes, software, etc.) are available via the Technical
Support Library product links at
www.radisys.com/products.

Safety notices

Lithium cell battery

The CR100 carrier board contains a lithium cell battery.
DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. Replace only with the same or equivalent
type recommended by the manufacturer. Dispose of batteries according to the manufacturer's instructions.
When removing or replacing the lithium cell, do not use a conductive instrument, as a short-circuit may cause
the cell to explode. Always replace the cell with one of the same type. This product uses a CR2032 cell. Dispose
of a spent cell promptly—do not recharge, disassemble, or incinerate a cell. Keep cells away from children.
Web site at www.radisys.com
®
www.radisys.com/support
WARNING
for product information and other
or the product pages at
5