Optional Components; Memory Modules; Fansinks - RadiSys PROCELERANT CE915GM Quick Start Manual

1
Checking your order

Optional components

Memory modules

The COM Express module requires one memory module to operate. For supported memory
module options that have been validated for use with these COM Express modules, refer to the
Procelerant CE915GM Memory Validation List documentation on the RadiSys Web site.

Fansinks

The table below lists the product codes of fansinks offered by RadiSys. A complete list of all the
components in each fansink kit is provided in the tables that follow.
CE-AHSA
CE-PHSA
CE-PHS17A
CE-HSPA
CE-TIM
8
Product code
Active heatsink assembly (a fan is built into the heatsink) for any COM Express
module in a 2U chassis.
The power connector for the CE-AHSA fansink is ATX-compliant.
Heatsink dimensions: 125 x 95 x 26.90mm
Fansink dimensions: 80 x 80 x 15mm
Fansink power supply: +5V to +13.8V (+12V recommended)
A passive heatsink for any COM Express module in a 1U chassis. A chassis fan is
required with this option.
Dimensions: 125 x 95 x 26.90mm
A 17mm low-profile passive heatsink for COM Express modules CE373A or CE738A
in a 6HP (ATCA) blade. An air velocity of 400 lfm [2 m/sec] is required. Use with
CE738A requires a chassis fan.
Dimensions: 125 x 95 x 14.94mm
Heat spreader for CE760A, solid aluminum, compliant with PICMG COM.0 COM
Express specification Revision 1.0
Dimensions: 125 x 95 x 11mm
Thermal compound application bar, phase change at 58ºC (136ºF)
Description