Danfoss VLT CDS 803 Operating Manual page 5

Operating Guide | VLT® Compressor Drive CDS 803
1 Introduction
1.1 Purpose of this Operating Guide
This operating guide provides information for safe installation and commissioning of the AC drive. It is intended for use by qualified
personnel. Read and follow the instructions to use the drive safely and professionally. Pay particular attention to the safety instructions
and general warnings. Always keep this operating guide available with the drive.
1.2 Trademarks
®
VLT is a registered trademark for Danfoss A/S.
1.3 Additional Resources
Other resources are available to understand advanced drive functions and programming.
• The programming guide provides greater detail on working with parameters and shows many application examples.
• The design guide provides detailed information about capabilities and functionality to design motor control systems.
• Supplementary publications and manuals are available from Danfoss.
See www.danfoss.com for supplementary documentation.
VLT® Motion Control Tool MCT 10 software support
Download the software from the Service and Support download page on www.danfoss.com.
During the installation process of the software, enter CD-key 34544400 to activate the CDS 803 functionality. An activation key is not
required for using the CDS 803 functionality.
The latest software does not always contain the latest updates for the drive. Contact the local sales office for the latest drive updates (in
the form of *.upd files), or download the drive updates from the Service and Support download page on www.danfoss.com.
1.4 Manual and Software Version
This manual is regularly reviewed and updated. All suggestions for improvement are welcome.
Table 1: Manual and Software Version
Edition
AQ321748767627xx-xx0101
1.5 Type Approvals and Certifications
The following list is a selection of possible type approvals and certifications for VLT® Compressor Drive CDS 803 drives:
Danfoss A/S © 2019.12
Remarks
New power sizes added to product range.
Software version
6.0–10 kW (8–15 hp): Version 2.0
18–30 kW (25–40 hp): Version 1.00
AQ321748767627en-000101 / 130R0570| 5
Introduction