Product Specifications - Briggs & Stratton 073046 Operator's Manual

High pressure water pump

Hide thumbs

Table Of Contents

Model 073046

Water Pump Specifications

Suction Port Diameter . . . . . . . . . . . . . .

Discharge Port Diameter

2@ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25 mm (1 in)

1@ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Total Head. . . . . . . . . . . . . . . . . . . . . . . . . .60 m (197 ft)

Maximum Head

Suction Lift * . . . . . . . . . . . . . . . . . . . . . . . . . . 6 m (20 ft)

Discharge Lift * . . . . . . . . . . . . . . . . . . . . . .54 m (177 ft)

Maximum Discharge Capacity* . 350 l/min (92 gal/min)

Engine Specifications

Displacement . . . . . . . . . . . . . . . . . . 208 cc (12.69 in 3 )

Oil Capacity. . . . . . . . . . . . . . . . . . . . . . . . 0.59 l (20 oz)

Tune-up Specifications

Spark Plug Gap. . . . . . . . . . . . . . . . 0.76 mm (0.030 in)

Spark Plug Torque . . . . . . . . . . . . . . .20 Nm (180 lb-in)

Common Service Parts **

Air Filter,Oval ................................................... 590601

Air Filter Pre-cleaner,Oval................................ 590602

Fuel Additive .............................................. 5041, 5058

Resistor Spark Plug ......................................... 491055

Spark Plug Wrench...........................................816206

* This high pressure water pump is rated in accordance with Briggs & Stratton standard 621K.

** We recommend that you see any Briggs & Stratton Authorized Dealer for all maintenance and service of the

water pump. Use only genuine Briggs & Stratton parts.

Power Ratings: The gross power rating for individual petrol engine models is labeled in accordance with SAE

(Society of Automotive Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in

accordance with SAE J1995. Torque values are derived at 2600 RPM for those engines with "rpm" called out on the

label and 3060 RPM for all others; horsepower values are derived at 3600 RPM. The gross power curves can be

viewed at www.BRIGGSandSTRATTON.COM. Net power values are taken with exhaust and air cleaner installed

whereas gross power values are collected without these attachments. Actual gross engine power will be higher

than net engine power and is affected by, among other things, ambient operating conditions and engine-to-engine

variability. Given the wide array of products on which engines are placed, the petrol engine may not develop the

rated gross power when used in a given piece of power equipment. This difference is due to a variety of factors

including, but not limited to, the variety of engine components (air cleaner, exhaust, charging, cooling, carburetor,

fuel pump, etc.), application limitations, ambient operating conditions (temperature, humidity, altitude), and engine-to

engine variability. Due to manufacturing and capacity limitations, Briggs & Stratton may substitute an engine of higher

rated power for this engine.

High Pressure Water Pump