Angle Adjustment - SHOWTEC ACT PC 60 RGBW User Manual

ACT PC 60 RGBW
To mount the device, follow the steps below:
01) Use a clamp to attach the device to the supporting structure, as shown in Fig. 06. Make sure that the
device cannot move freely.
02) Secure the device with a secondary suspension, for example a safety cable. Make sure that the
secondary suspension can hold 10 times the weight of the device. If possible, the secondary
suspension should be attached to a supporting structure independent of the primary suspension. Put
the safety cable through the safety eye (06), as shown in Fig. 06.

Angle Adjustment

You can adjust the angle of the device with the adjustment handle (05).
01) Turn the adjustment handle (05) counterclockwise to release it.
02) Tilt the device at the desired angle (see Fig. 07).
03) Turn the adjustment handle (05) clockwise to tighten it. Make sure that the device cannot move
freely after the adjustment handle (05) is tightened.
Product code: 34020
14
Fig. 06
Fig. 07