Operation; Safety Instructions For Operation; Control Modes - SHOWTEC ACT PC 60 RGBW User Manual

ACT PC 60 RGBW
6.

Operation

Safety Instructions for Operation

Attention
This device must be used only for the purposes it is designed for.
This device is intended for professional use as a theater spot. It is suitable only for indoor installation. This
device is not suitable for households and for general lighting.
Any other use, not mentioned under intended use, is regarded as non-intended and incorrect use.
Attention
Power supply
Before connecting the device to the power supply, make sure that the current, voltage and frequency
match the input voltage, current and frequency specified on the information label on the device.

Control Modes

The ACT PC 60 RGBW can be operated with a DMX controller, and as a stand-alone device or in a
master/slave setup without a DMX controller.
The ACT PC 60 RGBW supports the following control modes:
● Stand-alone:
● Master/Slave:
● DMX-512:
For more information about how to connect the devices, refer to 5. Setup on pages 16–18.
To operate the device manually as a stand-alone device or in a master/slave setup:
01) Select Manually Defined in the DMX Fail pop-up submenu. See 6.6.1.3. DMX Fail on page 24 for more
information.
02) Adjust the color, strobe, dimmer and zoom in the Manually Defined submenu. See 6.6.5.1. Manually
Defined on page 27 for more information.
To run one of the built-in programs in auto operation mode without a DMX controller:
01) Select Show in the DMX Fail pop-up submenu. See 6.6.1.3. DMX Fail on page 24.
02) Select one of the 64 color macros or one of the 9 built-in chases in the Show Chase pop-up
submenu. See 6.6.2.2. Show Chase on pages 25–26 for more information.
You can additionally activate sound-controlled operation when running the built-in programs. See 6.6.2.1.
Sound Settings on page 25 for more information.
Product code: 34020
Auto operation mode (built-in chases, color macros), manual operation,
sound-controlled operation mode (built-in chases)
Auto operation mode (built-in chases, color macros), manual operation,
sound-controlled operation mode (built-in chases)
5 channels, 7 channels and 11 channels
19