Table of Contents
Advertisement
ACT PC 60 RGBW
02) Press the ENTER button to confirm your selection and open the respective pop-up submenu where
you can adjust the values.
03) Press the UP/DOWN buttons to adjust the values. The adjustment range is between 0 and 255.
04) Press the ENTER button to confirm your choice.
Fixture Information
In this menu you can view the LED operating hours and the firmware version of the device.
01) Press the UP/DOWN buttons to select one of the following 2 options:
●
Fixture Use Time:
●
Firmware Version:
02) Press the ENTER button to confirm the selection and view the information.
Reset Functions
In this menu you can reset the zoom.
01) Press the ENTER button to open the pop-up submenu for the reset functions:
02) Press the UP/DOWN buttons to choose between NO and YES. If you choose YES, the zoom will be
reset to the default factory settings.
03) Press the ENTER button to confirm your choice.
Special Functions
In this menu you can reset the device's settings to the default factory settings.
01) Press the ENTER button to open the pop-up submenu for the factory settings:
02) Press the UP/DOWN buttons to choose between NO and YES. If you choose YES, the device's settings
will be reset to the default factory settings.
03) Press the ENTER button to confirm your choice.
Product code: 34020
Provides information about the total hours of operation of the LEDs
Shows the current firmware version
28
Advertisement
Table of Contents
