Panasonic TK-AS66-ZEX Instruction Manual page 32

For Your Operating Convenience (continued)
Setting mode and check mode (continued)
How to set (For details on the items which can be set and the settings established when

purchased, see P. EN30.)
Operation
Item set
1
Turn off the faucet,
and press
on the control
panel for 1 second.
2
Press .
3
Select the item
using
 Each time this button
is pressed, the
selection changes.
4
Press .
 The current setting
is displayed in white
lettering against a
black background.
5
Select the item
using
 Each time this button
is pressed, the
selection changes.
6
Press .
<The setting is fi nished>
7
Select the item
using
 Each time this button is
pressed, the selection changes.
8
Press .
Note
 When is pressed in steps 2 to 5, the previous screen is restored. After the settings are completed, the previous screen
will not be restored even when the button is pressed.
 Displays on the screens indicated will be in Chinese even if the English display mode is established.
EN32
TK-AS66-ZEX̲En.indb 32 TK-AS66-ZEX̲En.indb 32
Alkaline priority OFF (ON)
Setting mode
.
Weak acidic buzzer
Alkaline priority
Buzzer volume
Alkaline priority
On
Off
Select "ON" to set
this item ON
.
Alkaline priority
On
Off
If "ON" was
selected, the
" 鹼性優先「ON」
完畢 " message
Alkaline priority
appears. set to OFF.
Select " 不是 " to set
another item.
.
If " 不是 " was selected,
go back to step 3.
Remaining cartridge life display (standby status)
LCD displays
Buzzer volume High, Medium, Low
Mode selection
Setting mode
Check mode
Setting mode
pH fi ne adjustment
Continue mode
Water output buzzer
Setting mode
Weak acidic buzzer
Alkaline priority
Buzzer volume
Buzzer volume
High
Medium
Low
Select the desired volume level.
e.g.) Set the level to High.
Buzzer volume
High
Medium
Low
The selected
volume level
is displayed
here.
Buzzer volume
now set to High.
After about 3 seconds
Exit the setting mode?
No
e.g.)
Electrolysis signal OFF (ON)
Setting mode
Electrolysis signal
Measurement
condition setting
Exit
Electrolysis signal
On
Off
Select "ON" to set
this item ON
Electrolysis signal
On
Off
If "ON" was
selected, the
" 電解信號「ON」
完畢 " message
Electrolysis signal
appears. now set to OFF.
Yes
2017/01/30 15:04:21 2017/01/30 15:04:21