Finely Adjusting The Ph Level (Ion Concentration) - Panasonic TK-AS66-ZEX Instruction Manual

Operation (continued)

Finely adjusting the pH level (ion concentration)

To bring the pH level of the
water processed through the
Alkaline Ionizer closer to the
pH standard (water quality
indicator number), the pH
levels set for the "Alkaline"
or "Weak Acidic" water
quality selector buttons can
be fi nely adjusted in 3 steps:
"Stronger", "Standard" or
"Milder".
Note
 The pH level fi ne adjustment
changes the pH level in a
range from 0.2 to 1.5 for
"Stronger" or "Milder" from
the "Standard" setting.
(Depending on the water
quality and usage conditions,
there is some latitude in the
amount of the change.)
When it is
purchased,
"Standard" is
selected.
Control panel
LCD
display
Water quality selector buttons
Note
 When is pressed in steps 2 to 5, the previous screen is restored. The previous screen will not be restored
when it is pressed after the settings are completed.
 Displays on the screens indicated will be in Chinese even if the English display mode is established.
EN24
TK-AS66-ZEX̲En.indb 24 TK-AS66-ZEX̲En.indb 24
Operation
1
Turn off the faucet,
and press
on the control panel
for 1 second.
2
Press .
3
Press .
4
To fi nely adjust the pH
level, press one of the water
quality selector buttons.
5
Press , and
select the pH fi ne
adjustment setting.
 If there is more than one
button for which the pH
level is to be fi nely adjusted,
repeat steps 4 and 5.
6
Press .
<The setting is fi nished>
 Adjustment of all the water
quality pH levels set in
steps 4 and 5 is completed.
7
Press
and select " 是 ".
8
Press .
9 Check the pH level using the pH test kit.
(P. EN17)
LCD displays
Mode selection
Setting mode
pH fi ne adjustment: Alkaline 1
e.g.)
e.g.) When is pressed
pH fi ne adjustment: Alkaline 3
e.g.) To set to "Stronger"
pH fi ne adjustment: Alkaline 3
After about
3 seconds
Fine adjustment
of the water
quality pH level
completed
Exit the setting mode?
,
e.g.)
Setting mode
Check mode
pH fi ne adjustment
Continue mode
Water output buzzer
Stronger
Standard
Milder
Stronger
Standard
Milder
Stronger
Standard
Milder
Exit the setting mode?
Yes
No
Yes
No
2017/01/30 15:04:17 2017/01/30 15:04:17