Panasonic TK-AS66-ZEX Instruction Manual page 28

For Your Operating Convenience (continued)
Measuring the water output volume (continued)
Correcting the water

output display
There is a slight diff erence
between the water output
display and actual output
of water. (This depends
on the usage conditions,
water pressure and other
factors.) If there is a
signifi cant diff erence,
correct the water output
display.
Control panel
LCD display
Note
 When is pressed in steps 5 to 7, the previous screen is restored. After the settings are completed, the
previous screen will not be restored even when the button is pressed.
 Once the settings have been set, they will be stored in the memory until other settings are established (until
they are changed).
 Displays on the screens indicated will be in Chinese even if the English display mode is established.
EN28
TK-AS66-ZEX̲En.indb 28 TK-AS66-ZEX̲En.indb 28
Operation
After performing steps 1 to 4 of "Setting the diff erence in height between the
main spout and acidic water spout" on P. EN27, perform the steps below.
5
Press , and
select " 補正 ".
6
Press .
7
Press ,
and select one of the
correction values listed
in the table.
Diff erence between
Correction
water output displayed
and actual water output
When the actual water
output is about 20% more –20%
than the display
When the actual water
output is about 10% more –10%
than the display
When the diff erence is
±0% *
less than 10%
When the actual water
output is about 10% less +10%
than the display
When the actual water
output is about 20% less +20%
than the display
*: No compensation
8
Press .
<The setting is fi nished>
9
Press , and
select " 是 ".
10
Press .
LCD displays
e.g.) When the water output
value
display is 0.5 liter, and
the actual water output
is 0.6 liter (the water
output is about 20% more
than the display)
After about
3 seconds
Compensation now
set to –20%
Exit the setting mode?
e.g.)
Measurement condition setting
Height diff erence
Compensation
Compensation
–20%
–10%
±0%
Compensation
–20%
–10%
±0%
Exit the setting mode?
Yes
No
Yes
No
2017/01/30 15:04:19 2017/01/30 15:04:19