Panasonic TK-AS66-ZEX Instruction Manual page 15

3
Screw in the outlet pipe until it is secured fi rmly.
 Do not use any tools for this assembly (since the pipe may be damaged).
 Ensure that the gasket is not twisted (since this may cause the water to leak).
 Do not lift the unit by taking hold of the outlet pipe (otherwise damage may
result).
Secure the acidic water
5
and drain hoses using the
suction disc.
 Secure the hoses so that they will not
move out of place.
Note
 If the hose is too long, it is recommended
that you cut it to the proper length (cut it
straight down).
 Immediately after the Alkaline Ionizer has
been installed, "Preparation time" blinks
for about 20 seconds on the LCD display
when water is run through the Alkaline
Ionizer. (P. EN9)
 The language of the LCD displays can be
selected from English or Chinese.
(P. EN19)
TK-AS66-ZEX̲En.indb 15 TK-AS66-ZEX̲En.indb 15
Gasket
6
 The buzzer sounds, about 15 seconds
later the LCD display lights up in blue,
and "鹼性1 （飲用初期） " appears on the
display
 The Alkaline Ionizer's power consumption
is 1 W even in the standby status.
 The power plug is normally kept connected
to the power outlet (to keep the automatic
electrode cleaning function working).
LCD display
Connect the power plug to
the power outlet
(AC 220 V - 240 V)
Important
.
EN15
2017/01/30 15:04:14 2017/01/30 15:04:14