Hydraulic Maintenance; Storage - Landoll 2210 Series Operator's Manual

4-7 HYDRAULIC MAINTENANCE

4-7.1 Check the tractor hydraulic fluid level per
tractor owners manual and after any leakage.
Check fluid level with the cylinders in the re-
tracted position.

4-8 STORAGE

4-8.1 The service life of the 2210 Series Weath-
erproofer will be extended by proper off-
season storage practices. Prior to storing the
unit, complete the following procedures:
a. Completely clean the unit.
b. Inspect the machine for worn or defective
parts. Replace as needed.
c. Repaint all areas where the original paint
film is worn off.
4-7.2 If a cylinder or valve leaks, disassemble
the parts to determine the cause of the leak.
Any time a cylinder is opened up, or when-
ever any seal replacement is necessary, it is
advisable to clean all parts and replace all
seals. Seal kits are available from your Lan-
doll dealer.
4-7.3 Check all hydraulic hoses weekly. Look for
binding or cracking. Replace all worn or de-
fective parts immediately.
d. Grease or coat all exposed metal surfaces
of shanks, points, and coulters.
e. Lubricate each point of the machine as
stated in Paragraph 4-6.
4-8.2 Store the unit in a shed or under a tarpau-
lin to protect it from the weather. The ground
tools and tires should rest on boards, or
some other object, to keep them out of the
soil.
4-7