Operation; Logging In - Tripp Lite B064-000-STN Owner's Manual

3. Operation

3.1 Logging In

The B064-000-STN is a central control station used to monitor several or all of the B064-IPG-Series KVM switches in
your network. A valid user name and password are required to log in (Figure 6). The default user name and password are
administrator and password, respectively.
If invalid credentials are entered, an Invalid User Name or Password, or Login Failed message will appear. Log in again with the
correct user name and password.
Note: If the number of invalid login attempts is exceeded, a timeout period is invoked. You must wait until the timeout period expires before
attempting to login again.
The B064-000-STN supports two different modes:
• Console Station Mode: Log into the console station (My Device)
• KVM Device Mode: Log into a KVM directly
1. a. To log into the console station (My Device), select My Device from the Address dropdown menu.
b. To log into a KVM device directly, specify the device's IP address and its port.
Note: To find the addresses of other KVM devices on the same local area network, click the magnifying glass symbol or look in the
Address dropdown menu for a device history list (the device history can be cleared using a terminal command).
2. Enter a user name and password (by default, user name and password are administrator and password, respectively), then
click "Login" to log in.
Note: For security purposes, the user name and password should be changed by the administrator to unique values.
3. At the bottom right-hand corner, a language option is available (English is default). Click to change the language.
Figure 6: Login Screen
9