Table of Contents
Advertisement
3. Operation
3.2 Dashboard
Once you have successfully logged in, the HDMI KVM over IP Remote User Console Station interface dashboard appears.
Note: The screenshot below depicts an administrator's page. Depending on the user type and permissions, not all elements will appear.
9
No. Name
Tab Management
1
Panel Array Management
2
Device Management
3
System Configuration
4
User Settings
5
Username
6
Individual Monitor Option
7
Description
Tab Management allows users to separate KVM over IP switches currently
being monitored into different tab groups or select which tab is to be
displayed.
Panel Array Management allows users to simultaneously display the ports
connected to the KVM over IP switches. The ports can also be grouped into
different groups displaying only the ports in the chosen group simultaneously.
Device Management allows users with administrative access/authority to add
devices to or remove devices from the User Console Station.
System Configuration allows users with administrative access/authority
to manage users/groups, display device information, configure network,
advanced network management (ANMS), security settings, manage firmware
upgrade, system backup/restore, push/pull configurations to or from other
devices, access terminal or reset system to factory default settings.
User Settings allow users to change password, configure preferences, log out,
restart the system, shut down the system or display quick information about
the user console station.
Displays the user name.
Individual Monitor Option allows users to select which port is to be displayed
on an assigned display, open the GUI or disconnect from the KVM over IP
switch.
If the switch is disconnected, you can also click Reconnect to reconnect the
switch to the console station.
10
1 2 3 4 5
6
7
8
Advertisement
Table of Contents
