Mouse Sync Mode; Automatic Mouse Synchronization; Manual Mouse Synchronization; Mac And Linux Considerations - Tripp Lite B064-000-STN Owner's Manual

Hdmi kvm over ip remote user console station

Hide thumbs Also See for B064-000-STN:

Table of Contents

6. Toolbar Interface

6.4.3 Mouse Sync Mode

Synchronization of the local and remote mouse pointers is accomplished either automatically or manually.

This provides automatic locked-in syncing of the remote and local mouse pointers – eliminating the need to constantly resync

the two movements.

If the local mouse pointer goes out of sync with the remote system's mouse pointer there are a number of methods to bring

them back into sync:

1. Perform an Auto Sync with the Video Adjustment function (see section 6.2 Video Settings for details).

2. Invoke the Adjust Mouse function with the Adjust Mouse hotkeys (see section 6.3.1 Hotkeys for details).

3. Set the mouse speed and acceleration for each problematic server attached to the switch. See the user manual of the

corresponding KVM over IP switch for instructions.

• For Mac OS versions 10.4.11 and higher, there is a second Sync setting to choose from. If the default Mouse Sync result is

not satisfactory, try the "Mac 2" setting. To select Mac 2, click the Further Configuration icon, hover your mouse over Mouse

Sync Mode → Automatic for Mac 2.

• Linux does not support Sync Mode, but there is a setting on the Mouse Sync Mode menu for Redhat AS3.0 systems. If

you are using a USB Adapter Cable with an AS3.0 system and the default mouse synchronization is not satisfactory, try the

Redhat AS3.0 setting. In either case, you must perform the manual mouse synchronization procedures described above.

Table of Contents