Using Group Configuration Page - Tripp Lite B064-000-STN Owner's Manual

Hdmi kvm over ip remote user console station

Hide thumbs Also See for B064-000-STN:

Table of Contents

5. System Configuration

5.1.2.2 Using Group Configuration Page

Follow the steps below to go to the Group's configuration page:

1. Click "Groups" under "User Management" in the left-hand side menu to bring up the configuration page.

2. Click the pen icon under the "Modify" column.

3. In the configuration page, select the Members tab as shown:

Assign Users to a Group

1. In the Available column, select the members (users) that you want the group to have.

2. Click the >> icon button to put the members into the Selected column (thereby adding into the group).

3. Repeat the above to assign members to each group.

4. Click "Save" when you are done.

Remove Users from a Group

1. In the Selected column, select the members (users) to be removed from the group.

2. Click the << icon button to put the members into the Available column (thereby removing from the group).

3. Repeat the above to remove members from each group.

4. Click "Save" when you are done.

Table of Contents