Maintenance; Upgrade Main Firmware - Tripp Lite B064-000-STN Owner's Manual

Hdmi kvm over ip remote user console station

Table of Contents

5. System Configuration

5.3 Maintenance

The Maintenance function is used to upgrade firmware, backup and restore configuration and account information, push/pull

configurations, send terminal commands, ping network devices and restore default values.

As new versions of the firmware become available, they can be downloaded from tripplite.com/support.

Click "Upgrade Main Firmware" under "Maintenance" in the left-hand menu to bring up the information page.

To upgrade the main firmware:

1. Get the latest firmware by downloading the firmware from tripplite.com/support to a computer.

2. Unzip the .zip file for the .csf file and transfer it to a USB flash drive.

Note: Use FAT file system-formatted USB flash drive(s).

3. Remove the USB flash drive from the computer and insert it into a USB port of the console station.

4. On the console station firmware page, click "Choose File" and a file management window will open:

Table of Contents