Device Assignment; Using Device Configuration Page - Tripp Lite B064-000-STN Owner's Manual

Hdmi kvm over ip remote user console station

Table of Contents

5. System Configuration

5.1.3 Device Assignment

This function assigns access rights to users or groups and can be achieved from Device configuration page. Administrators can

assign users to a particular user's privileges of an added KVM over IP Switch and access ports.

Follow the steps below to go to the User's configuration page:

1. Click "Users" under "User Management" in the left-hand side menu to bring up the configuration page.

2. Click the pen icon under the "Modify" column.

3. In the configuration page, select the Device tab as shown:

Each of the elements on this page is described below.

Devices

• The list displays the currently available device(s).

• When there is a change in the user accounts and groups for a device, click the "Refresh" icon to refresh the user list of that

device.

Device Users Config

• After selecting a device, the Available column (left column) lists the available users (of the device).

• The Selected column (right column) shows the selected user (of the device).

• Click the >> or << icon buttons to shift between Available and Selected.

• The user/group of the console station will gain the permission of the selected user (of the device).

• Each KVM over IP console station user can only be assigned to one user account privilege of the KVM over IP switch device.

Table of Contents