Safety Precautions; Before Connecting - Pylontech UP2500 Product Manual

1. Safety Precautions

Reminding
1) It is very important
before installing or using
warnings in this document can result
damage battery, potentially
2) If the battery
SOC shou ld
3) Battery needs to be recharged within
4) Do not expose cable outside;
All the battery terminals must be disconnected for
5)
6) Please contact
7) Do not use
8) Do not expose battery to flammable or harsh chemicals or vapors;
Do not paint any part of battery, include any internal or external components;
9)
OJ
1 Do not connect battery with PV solar wiring directly;
1 1) The warranty claims are excluded for direct or
1 2) Any foreign
@
Li-ion
&
Warning

1.1 Before Connecting

1) After unpacking, please check product and packing list first, if product is damaged or
lack of parts, please contact with
2) Before installation,
turned-off
3) Wiring must be
short circuit with the external device;
4) It is prohibited to connect the battery and
5) The embedded
battery in series;
6) Battery system must be wellgrounded and the resistance must be less
7) Please ensured the
9UPSV0501
l
and necessary
battery.
rendering
is stored for long time,
be no less than 90%;
the supplier within 24 hours
cleaning solvents to clean
object is prohibited to i
-
be sure to cut off the
mode;
correct, do not
BMS in the battery
electrical parameters of battery system are compatible to
to read the user manual
Failure to do so or to follow any of the instructions or
in electrical shock,
it inoperable.
it is required to charge them every six months, and the
12 hours, after fully discharged;
if there is
battery;
indirect
nsert into any part
the local retailer;
grid power
mistake the positive and negative
AC power directly;
is designed for 24VDC,
1/19
carefully (in the accessories)
serious injury,
maintenance;
something abnormal.
damage due to items above.
of battery.
and make sure the battery is in the
cables,
please DO
than 1O;
or death, or can
and ensure no
NOT connect
related