Replacing The I/O Board; Procedure; Post-Requisites - Dell Inspiron 14 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

Steps
1. Slide the I/O-board cable into the connector on the I/O-board and press down on the latch to secure the cable.
2. Turn the I/O board over and align the screw hole on the I/O board with the screw hole on the palm-rest assembly.
3. Replace the screw that secures the I/O board to the palm-rest assembly.

Post-requisites

Steps
1. Replace the computer base.
2. Replace the keyboard.
3. Replace the wireless card.
4. Follow the procedure from step 5 to step 7 in
5. Replace the optical drive.
6. Replace the base cover.
7. Replace the battery.

Replacing the I/O board

computer. After working inside your computer, follow the instructions in
"Replacing the hard drive".
26
After
Replacing the I/O board 41