Removing The Power-Adapter Port; Prerequisites; Procedure - Dell Inspiron 14 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Prerequisites

Steps
1. Remove the battery.
2. Remove the base cover.
3. Remove the optical drive.
4. Remove the memory modules.
5. Follow the procedure from step 1 to step 3 in
6. Remove the wireless card.
7. Remove the keyboard.
8. Remove the computer base.
9. Remove the heat-sink assembly.
10. Remove the I/O board.
11. Remove the system board.

Procedure

Steps
1. Note the power-adapter-port cable routing and remove the cable from its routing guides on the palm-rest assembly.
2. Remove the screw that secures the power-adapter port to the palm-rest assembly.
3. Lift the power-adapter port, along with the power-adapter port cable, off the palm-rest assembly.
1. screw
46

Removing the power-adapter port

Removing the power-adapter port
computer. After working inside your computer, follow the instructions in
"Removing the hard drive".
2. power-adapter port
29
After